Skip to main content
List of Customer Presentations

An Automated Simulation Approach of Drive Trains towards Tonality Free Wind Turbines
ZF Wind Power Antwerpen NV  — Ben MARRANT

Digital Twin for Wind turbines Simulation meets Machine Learning
Schaeffler Technologies AG & Co. KG — Andrei DEGTIAREV & Matthias KOHLHEPP

REXS — The Standardized Interface for the Simple Exchange of Gearbox Data
FVA GmbH — Norber HAEFKE

Load Calculations with Simpack and Integration into Company Specific Workflows
elb|sim|engineering — Jochen HARMS

Cracking Problems in Wind Turbines
Principia, Madrid, Spain — Javier RODRIGUEZ

Wind Turbine Load Calculations with Nonlinear Flexible Rotor Blades
CWD RWTH Aachen University — Martin CARDAUN

Simulation of Loads in the Drivetrain of Wind Turbines using Simpack
Technical University of Dresden — Thomas ROSENLÖCHER 

Multibody Simulation Methodology for the Assessment of Drivetrain NVH-Behavior, Electric and Off-Road Vehicles
MSE RWTH Aachen University — Joerg BERROTH 

Aerodynamics and Aeroacoustics of Duct Wind Turbines for Urban Environments
Delft University of Technology — Francesco AVALLONE

On the Application of an equivalent Fluid for Simulating Porous Materials for Trailing Edge Noise Reduction
Delft University of Technology — Daniele RAGNI

Infrasound, Grid Connection and Digital Twins: Research for the Wind Industry
MesH Engineering GmbH — Stefan HAUPTMANN

Code to Code Comparison for the IEA 15 MW — Offshore Wind Turbine
Stuttgart Wind Energy (SWE) — M. Y. MAHFOUZ & Po Wen CHENG

Potentials of Wind Turbine Test Sites for Numerical Modelling and Wind Energy Research
University of Stuttgart & Technical University Munich — Fiona LÜDECKE, Helena CANET, Philipp BUCHER, Giorgia GUMA & Po Wen CHENG

 

List of Dassault Systèmes Presentations

Wind and Drivetrain Simulation, Overview and Update
Steve MULSKI — Dassault Systèmes 

R&D Update on Multibody System Simulation
Fabian MICZEK — Dassault Systèmes

Multibody System Simulation on 3DEXPERIENCE®
Axel DEWES — Dassault Systèmes

Abaqus for Wind-Turbine Foundations
Deepak DATYE — Dassault Systèmes

Structural Models for Rotorblade Design
Stefan DIETZ — Dassault Systèmes

Towards Digital Wind Turbine Noise Certification
Wouter van der VELDEN — Dassault Systèmes

Scope of Electromagnetic Simulation in the Design of Wind Turbines
Arnab BHATTACHARYA — Dassault Systèmes

From Design to Manufacturing Engineering
Bertrand LACOSTE BOURGEACQ — Dassault Systèmes

Read all abstracts