Skip to main content

Our speakers

  • Aleksey MALIKOV

    Sales Director, PS channel - Dassault Systèmes Russia & CIS

    Sales Director, PS channel - Dassault Systèmes Russia & CIS

    Aleksey Malikov Aleksey Malikov

    Aleksey has more than 10 years of experience in IT. He had different roles in such companies as Microsoft, IBM, Autodesk. Aleksey joined Dassault Systèmes in 2016, since then he is responsible for SOLIDWORKS business in Russia.

    Talks

  • Alexey RYZHOV

    Managing Director - Dassault Systèmes Russia & CIS

    Managing Director - Dassault Systèmes Russia & CIS

    Alexey Ryzhov Alexey Ryzhov

    Aleksey joined Dassault Systèmes team in February 2016 as a head of the company’s Russian branch. Prior to Dassault Systèmes from 2011 to 2015 Alexey was the Regional Director of Autodesk Russia.

    Alexey started his career in IT in 1996 when he joined Intel Corporation as a Sales Support Specialist. In 1999 he joined Microsoft where he worked for 12 years. In 2005, he received an appointment to the position of OEM Sales Director in Microsoft Russia. Two years later, Alexei Ryzhov was invited to Microsoft headquarters in Seattle, where he held the position of OEM Strategy Director in EMEA, APAC, LATAM regions.

    Alexey Ryzhov graduated from the Physics and Mathematics Faculty of the Russian University of Peoples' Friendship. In addition, he received an MBA degree in Strategic Management from the University of California Eastbay.

    Talks

  • Igal KAPTSAN

    Product Management, Vice President - Dassault Systèmes

    Product Management, Vice President - Dassault Systèmes

    Igal Kaptsan Igal Kaptsan

    Kaptsan has over 25 years of experience building software products to serve large and growing markets. The Co-founder and CEO of myCustom3D which was acquired by Dassault Systèmes late 2014. Igal joined Dassault to continue and work on the consumer personalization offering as the VP of Product Management, SOLIDWORKS Sell.

    Prior to myCustom3D, he was the VP of Product Definition at PTC, overseeing the design of the CAD product suite; in this position with PTC and with Bentley before, he led the definition of two of the leading design tools in the market. He holds a B. Sc in Mechanical Engineering from Ben-Gurion University, Israel.

    Talks

  • Vladimir PIROZHKOV

    Product Management, Vice President - High-End Prototyping Centre “Kinetics MISIS”

    Product Management, Vice President - High-End Prototyping Centre “Kinetics MISIS”

    Vladimir Pirozhkov Vladimir Pirozhkov

    A world-leading designer and innovator, renowned for designing the interiors of Toyota and Citroen's best-selling cars. An expert of  Skolkovo Business School.  Created concept design for the interior of the new spaceship “Federaion”. Author of SOCHI2014 Olympics Torch.

    From 1994-2000 Pirozhkov was the Interior Designer at Citroen, and worked on the development of Xantia, Xsara, C3 Lumiere, C3 Pluriel, C5, C6 mpodels. Having left Citroen, he spent 7 years as a Senior Designer in the Toyota Europe Design Development team, and worked on top-selling models such as Yaris, Avensis, Auris, Corolla, RAV4, Celica, Prius, and Q, RAV-4 and concept-cars MTRC and UUV.

    Had internship at Luigi Colani’s world renowned Design Buro. Worked with such companies as Adidas, Ferrari, and Yves Saint Laurent. Studied Industrial Design at the Sverdlovsk Architectural Institute, graduated from the Art Center College of Design (Switzerland).

    Talks

  • Gian Paolo BASSI

    CEO, SOLIDWORKS - Dassault Systèmes

    CEO, SOLIDWORKS - Dassault Systèmes

    Gian Paolo Bassi Gian Paolo Bassi

    Has more than 25 years of experience in 3D, CAD, and PLM industries. As CEO, Gian Paolo spearheads the development of SOLIDWORKS’ future product and technology strategies. He most recently served as the vice president of research and development, where he was responsible for charting future product and technology strategies, including the development of the brand’s cloud applications.

    Prior to SOLIDWORKS, Gian Paolo was the founder and CTO of RIWEBB where he oversaw the development of new technologies for the Mechanical and Architectural Design Automation industry, collaborating with companies like Dassault Systèmes. Prior to RIWEBB, Gian Paolo served as vice president and CTO of ImpactXoft, where he led the team developing functional modeling and collaboration applications which are now part of CATIA. In this position, he co-invented three of his five patents in functional modeling. He also served in the R&D organizations of companies like Computervision and think3. Gian Paolo holds a degree in mechanical engineering from the University of Bologna.

    Talks

  • Alexey ANTIPOV

    Leading Project Engineer - AlfaRobotics

    Leading Project Engineer - AlfaRobotics

    Alexey Antipov Alexey Antipov

    We wanted to make "just" an anthropoid robot. Our robot had to be different. Our robot had to be affordable. It was a start-up without external investments, grants and government contracts.
    I'll tell you how we made it possible with SolidWorks.

    Talks

    • B2B ROBOTICS: FROM THE IDEA TO THE CLIENT

      We wanted to make "just" an anthropoid robot. Our robot had to be different.

      Alexey Antipov
      Alexey ANTIPOV
      AlfaRobotics
      Alexey ANTIPOV
      Leading Project Engineer, AlfaRobotics

      Read more

  • Egor BACHURIN

    CAD / PDM engineer - ITOOLS

    CAD / PDM engineer - ITOOLS

    Egor Bachurin Egor Bachurin

    I will talk about tracking the time of tasks directly in the SOLIDWORKS environment for assessing the performance of employees and minimizing risks and on scheduling processes.

    Talks

    • MYCADTOOLS - INSTRUMENTS OF EFFECTIVE DESIGN IN SOLIDWORKS

      I'll talk about tools that speed up the work in SOLIDWORKS - about flexible s

      Egor Bachurin
      Egor BACHURIN
      ITOOLS
      Egor BACHURIN
      CAD / PDM engineer, ITOOLS

      Read more

    • NEW OPPORTUNITIES OF SOLIDWORKS PDM AND EXPANDING THE…

      I will talk about tracking the time of tasks directly in the SOLIDWORKS envir

      Egor Bachurin
      Egor BACHURIN
      ITOOLS
      Egor BACHURIN
      CAD / PDM engineer, ITOOLS

      Read more

    • CAMNETICS

      I will talk about the rapid creation of gears, assemblies, the addition of in

      Egor Bachurin
      Egor BACHURIN
      ITOOLS
      Egor BACHURIN
      CAD / PDM engineer, ITOOLS

      Read more

  • Ivan GAIDUKOV

    Technical Specialist - Syssoft

    Technical Specialist - Syssoft

    Ivan Gaidukov Ivan Gaidukov

    Designing is a creative process of linking a set of competing parameters. It is always a search for trade-offs between functionality, manufacturability and cost. You will learn how SolidWorks can solve multifactor parametric optimization problems taking into account existing project limitations.

    Talks

    • TOPOLOGICAL OPTIMIZATION IN SOLIDWORKS

      With the development of additive technologies and the growth of computing pow

      Ivan Gaidukov
      Ivan GAIDUKOV
      Syssoft
      Ivan GAIDUKOV
      Technical Specialist, Syssoft

      Read more

    • PARAMETRIC OPTIMIZATION IN SOLIDWORKS

      Designing is a creative process of linking a set of competing parameters.

      Ivan Gaidukov
      Ivan GAIDUKOV
      Syssoft
      Ivan GAIDUKOV
      Technical Specialist, Syssoft

      Read more

  • Andrey AIDZHANOV

    Technical Expert - Dassault Systèmes

    Technical Expert - Dassault Systèmes

    Andrey Aidzhanov Andrey Aidzhanov

    The report will highlight the issues of working with information in the implementation of capital construction projects using the 3DEXPERIENCE PLM platform, as well as the main features of the platform for managing capital construction projects using the BIM methodology.

    Talks

    • BIM Level 3 / BEM

      The report will highlight the issues of working with information in the imple

      Andrey Aidzhanov
      Andrey AIDZHANOV
      Dassault Systèmes
      Andrey AIDZHANOV
      Technical Expert , Dassault Systèmes

      Read more

  • Alexander BELOGLINTSEV

    Solutions Sales Manager - DELL

    Solutions Sales Manager - DELL

    Alexander Beloglintsev Alexander Beloglintsev

    Work in CAD applications requires both high performance computing and data security to preserve intellectual property. We will talk about approaches to the organization of workplaces for engineers and designers with the provision of data security measures and remote access to the workstation.

    Talks

    • BUILDING SAFE WORKPLACES FOR CAD WITH THE POSSIBILITY OF…

      Work in CAD applications requires both high performance computing and data se

      Alexander Beloglintsev
      Alexander BELOGLINTSEV
      DELL
      Alexander BELOGLINTSEV
      Solutions Sales Manager, DELL

      Read more

  • Oleg BOBKOV

    Leading Technical Specialist - IDT

    Leading Technical Specialist - IDT

    Oleg Bobkov Oleg Bobkov

    This slot is aimed at showing the maximum number of various fast commands, operations and other "secret" SOLIDWORKS chips in a very short time.

    Talks

    • SOLIDWORKS TIPS and TRICKS

      This slot is aimed at showing the maximum number of various fast commands, op

      Oleg Bobkov
      Oleg BOBKOV
      IDT
      Oleg BOBKOV
      Leading Technical Specialist, IDT

      Read more

    • BIG ASSEMBLY. CONFIGURATIONS

      I will speak about evaluating performance in SOLIDWORKS for analyzing the per

      Oleg Bobkov
      Oleg BOBKOV
      IDT
      Oleg BOBKOV
      Leading Technical Specialist, IDT

      Read more

  • Vitaly LOZA

    Technical Expert - Softline

    Technical Expert - Softline

    Vitaly Loza Vitaly Loza

    The designer should be able not only to create a product meeting the requirements for quality and strength, but also to minimize the weight and cost of the product while maintaining an aesthetic appearance.
    In the framework of the report we will answer the questions:
    What calculations can be performed with SOLIDWORKS solutions?
    What products can you expect?
    How do virtualization and cloud technologies help to reduce time?

    Talks

  • Evgeny GORSHKOV

    Product Manager - HP

    Product Manager - HP

    Evgeny Gorshkov Evgeny Gorshkov

    I will tell in the example of HP Inc how hardware manufacturers take into account the challenges and trends of the CAD market than the specialized workplace differs from a simple office PC and what tools are available to businesses to unlock the potential of their employees and to facilitate IT services for jobs engineers.

    Talks

    • HARDWARE MAINTENANCE OF CAD ON HP WORKSTATIONS

      I will tell in the example of HP Inc how hardware manufacturers take into acc

      Evgeny Gorshkov
      Evgeny GORSHKOV
      HP
      Evgeny GORSHKOV
      Product Manager, HP

      Read more

  • Evgeniy FEDOTOV

    Senior Technical Expert - Dassault Systèmes

    Senior Technical Expert - Dassault Systèmes

    Evgeniy Fedotov Evgeniy Fedotov

    The 3DEXPERIENCE platform allows organizing the work of all project participants and building managed processes on a single digital platform to create an innovative product. To users of SOLIDWORKS platform gives access to the most powerful PLM system and advanced tools for modeling, optimization, preparation and production management, thus ensuring the efficiency of investments in SOLIDWORKS solutions.

    Talks

    • 3DEXPERIENCE PLATFORM

      The 3DEXPERIENCE platform allows organizing the work of all

      Evgeniy Fedotov
      Evgeniy FEDOTOV
      Dassault Systèmes
      Evgeniy FEDOTOV
      Senior Technical Expert, Dassault Systèmes

      Read more

  • Dmitry ANPILOGOV

    General Director - ProCNC

    General Director - ProCNC

    Dmitry Anpilogov Dmitry Anpilogov

    I will talk about SOLIDWORKS CAM, how you can quickly develop a control program based on the technological elements and knowledge base, check the G-code without the machine rack, make a presentation of the processing project in eDrawings.

    Talks

    • How to choose a CAM for SOLIDWORKS

      I will talk about SOLIDWORKS CAM, how you can quickly develop a control progr

      Dmitry Anpilogov
      Dmitry ANPILOGOV
      ProCNC
      Dmitry ANPILOGOV
      General Director, ProCNC

      Read more

  • Andrei YUKHNEV

    Head of Laboratory - St. Petersburg Polytechnic University

    Head of Laboratory - St. Petersburg Polytechnic University

    Andrei Yukhnev Andrei Yukhnev

    I will demonstrate examples of using the SOLIDWORKS automatic design system in computational and experimental hemodynamics:
    • constructing models of arteries and veins to calculate blood flow;
    • casting of silicone and 3D printing of models of prosthetic vessels and heart valves for experimental stands using computer tomography and ultrasound diagnostic data.

    Talks

    • SOLIDWORKS IN COMPUTATIONAL AND EXPERIMENTAL HEMODYNAMICS

      I will demonstrate examples of using the SOLIDWORKS automatic design system i

      Andrei Yukhnev
      Andrei YUKHNEV
      St. Petersburg Polytechnic University
      Andrei YUKHNEV
      Head of Laboratory, St. Petersburg Polytechnic University

      Read more

  • Dmitry LOPATKIN

    Technical Expert - Dassault Systèmes

    Technical Expert - Dassault Systèmes

    Dmitry Lopatkin Dmitry Lopatkin

    In this report, you will learn about the approach and solutions of Dassault Systèmes in the field of digital production, namely, how to combine digital development and technological preparation of production with real production.

    Talks

    • PORTFOLIO OF SOLUTIONS FOR DIGITAL PRODUCTION

      In this report, you will learn about the approach and solutions of Dassault S

      Dmitry Lopatkin
      Dmitry LOPATKIN
      Dassault Systèmes
      Dmitry LOPATKIN
      Technical Expert, Dassault Systèmes

      Read more

  • Andrey SERAVKIN

    General Director - ITOOLS

    General Director - ITOOLS

    Andrey Seravkin Andrey Seravkin

    The report will provide an overview of the benefits of the SOLIDWORKS subscription as well as an analysis of the feasibility of purchasing subscriptions and temporary licenses in comparison with permanent licenses.

    Talks

    • LICENSES AND SUBSCRIPTIONS

      The report will provide an overview of the benefits of the SOLIDWORKS subscri

      Andrey Seravkin
      Andrey SERAVKIN
      ITOOLS
      Andrey SERAVKIN
      General Director, ITOOLS

      Read more

    • ITOOLS: tech support

      In this report, I will talk about the organization of technical support for u

      Andrey Seravkin
      Andrey SERAVKIN
      ITOOLS
      Andrey SERAVKIN
      General Director, ITOOLS

      Read more

    • ITOOLS: SPECIFICATION AND TOOLBOX - STATUS OF PROJECT

      The topics of this report are the current status of module development, speci

      Andrey Seravkin
      Andrey SERAVKIN
      ITOOLS
      Andrey SERAVKIN
      General Director, ITOOLS

      Read more

  • Dmitry GUMUSHLYU

    CAD / CAM engineer - ITOOLS

    CAD / CAM engineer - ITOOLS

    Dmitry Gumushlyu Dmitry Gumushlyu

    After creating a part and carrying out the necessary calculations, you need to understand how to produce this part. That's exactly what SolidWorks CAM is for. With it you can create a control program for a CNC machine and implement your project in production.

    Talks

    • SolidWorks CAM

      After creating a part and carrying out the necessary calculations, you need t

      Dmitry Gumushlyu
      Dmitry Gumushlyu
      ITOOLS
      Dmitry Gumushlyu
      CAD / CAM engineer, ITOOLS

      Read more

  • Andrey SALNIKOV

    Consultant for PLM Solutions - IGA Group

    Consultant for PLM Solutions - IGA Group

    Andrey Salnikov Andrey Salnikov

    Topics of our report:
    • Functional and software architecture 3DEXPERIENCE + SOLIDWORKS
    3DEXPERIENCE toolbar in SOLIDWORKS
    • Organization of teamwork in SOLIDWORKS
    • Digital product composition (BOM) in 3DEXPERIENCE based on the 3D model from SOLIDWORKS
    • Change management in 3DEXPERIENCE
    • Project management in 3DEXPERIENCE
    • Demonstration of the possibilities of working with 3D models from SOLIDWORKS in a web browser
    • Work in 3DEXPERIENCE with models from different CAD
    • Analytical toolbars for development work

    Talks

    • PLM for SOLIDWORKS on the basis of 3DEXPERIENCE PLATFORM

      Topics of our report:

      Andrey Salnikov
      Andrey SALNIKOV
      IGA Group
      Andrey SALNIKOV
      Consultant for PLM Solutions, IGA Group

      Read more

  • Petr ZHELEZNYAKOV

    Engineer - CAD.RU

    Engineer - CAD.RU

    Petr Zheleznyakov Petr Zheleznyakov

    You will learn how to design products with complex shapes using curves and surfaces constructed with their help. Topics I will cover:
    • Surface modeling in SOLIDWORKS
    • Types of curves and surfaces in SOLIDWORKS surface analysis tools
    • Preparation of control programs for CNC machines in the Edgecam CAM system
    • Associative connection with models and assemblies of SOLIDWORKS
    • Features of the program for working with different types of equipment
    • Automation of the work of a programmer and the development of postprocessors for existing equipment

    Talks

    • SOLIDWORKS FOR DESIGNING INTERNAL INTERIORS OF AIR AND…

      You will learn how to design products with complex shapes using curves and su

      Petr Zheleznyakov
      Petr ZHELEZNYAKOV
      CAD.RU
      Petr ZHELEZNYAKOV
      Engineer, CAD.RU

      Read more

    • SOLIDWORKS in CREATING RAISED ELEMENTS

      We will see how quickly and easily using Solidworks tools create and modify a

      Petr Zheleznyakov
      Petr ZHELEZNYAKOV
      CAD.RU
      Petr ZHELEZNYAKOV
      Engineer, CAD.RU

      Read more

  • Andrey VINOGRADOV

    Technical expert, SOLIDWORKS Russia&CIS - Dassault Systèmes

    Technical expert, SOLIDWORKS Russia&CIS - Dassault Systèmes

    Andrey Vinogradov Andrey Vinogradov

    I will talk about large assemblies, drawings, calculations, visualization, new commands - the main accents of the new version of SOLIDWORKS 2019.

    Talks

    • WHAT’S NEW IN SOLIDWORKS 2019

      I will talk about large assemblies, drawings, calculations, visualization, ne

      Andrey Vinogradov
      Andrey VINOGRADOV
      Dassault Systèmes
      Andrey VINOGRADOV
      Technical expert, SOLIDWORKS Russia&CIS, Dassault Systèmes

      Read more

  • Alexey KONDRASHOV

    Head of Business Development - Binology

    Head of Business Development - Binology

    Alexey Kondrashov Alexey Kondrashov

    Together with my colleague Alexander Skrylev we will talk about our project "Smart Urn" and its purposes, as well as how we designed our development with the help of SOLIDWORKS.

    Talks

    • BINOLOGY SAMRT BIN

      We will talk about our project "Smart Urn" and its purposes, as well as how w

      Alexey Kondrashov
      Alexey KONDRASHOV
      Binology
      Alexey KONDRASHOV
      Head of Business Development, Binology

      Read more

  • Boris BABUSHKIN

    Deputy Director of Engineering Consulting - CSoft

    Deputy Director of Engineering Consulting - CSoft

    Boris Babushkin Boris Babushkin

    SolidWorks-TechnologiCS is a single platform for a digital enterprise. Within the framework of the joint solution of SolidWorks-TechnologiCS, we managed to link designers, technologists and functional production units into a single system with a physically unified database. We will demonstrate how all stages of product design, subsequent planning and production management take place within this single system and what role each of the participants in the process plays in the digital production.

    Talks

    • THE SINGLE INFORMATION SPACE OF THE ENTERPRISE

      We will demonstrate how all stages of product design, subsequent planning and

      Boris Babushkin
      Boris BABUSHKIN
      CSoft
      Boris BABUSHKIN
      Deputy Director of Engineering Consulting, CSoft

      Read more

  • Mikhail KRASTELEV

    3D-scanning engineer - RangeVision

    3D-scanning engineer - RangeVision

    Mikhail Krastelev Mikhail Krastelev

    As part of my presentation, I will talk about the possibilities of using 3D-scanning, in particular about reverse engineering, I will demonstrate the whole cycle of this process: from a physical object to a mathematical model in SOLIDWORKS.

    Talks

    • REVERSE-ENGINEERING IN SOLIDWORKS

      As part of my presentation, I will talk about the possibilities of using 3D-s

      Mikhail Krastelev
      Mikhail KRASTELEV
      RangeVision
      Mikhail KRASTELEV
      3D-scanning engineer, RangeVision

      Read more

  • Andrey ANDRICHENKO

    Chairman of the Board of Directors - SDI Solution

    Chairman of the Board of Directors - SDI Solution

    Andrey Andrichenko Andrey Andrichenko

    The structure of our design and technological complex includes SolidWorks PDM, SolidWorks CAD, CAD processes "Time¬line", Labor Standardization System (STN) and "Semantic" System of Reference and Reference Information Management (NSI). SolidWorks PDM implements the functions of managing the composition of products, in conjunction with which the results of work in SolidWorks CAD and CAD TP "Time¬line" are accumulated.

    Talks

    • SEMANTIC - SYSTEM OF MANAGEMENT

      The structure of our design and technological complex includes SolidWorks PDM

      Andrey Andrichenko
      Andrey ANDRICHENKO
      SDI Solution
      Andrey ANDRICHENKO
      Chairman of the Board of Directors, SDI Solution

      Read more

  • Stefan ANDRIANOV

    CAD / CAE engineer - ITOOLS

    CAD / CAE engineer - ITOOLS

    Stefan Andrianov Stefan Andrianov

    I will talk about the new capabilities of FEA and CFD modules for engineering calculations, I will show by examples where these functions can be used.

    Talks

  • Bruno CALATAYUD

    International Projects Manager - EFICAD

    International Projects Manager - EFICAD

    Bruno Calatayud Bruno Calatayud

    We will tell how SWOOD boosts SOLIDWORKS woodworking projects from design to production.

    Talks

    • SWOOD - INTEGRATED SOLUTION FOR WOODWORKING

      We will tell how SWOOD boosts SOLIDWORKS woodworking projects from design to

      Bruno Calatayud
      Bruno CALATAYUD
      EFICAD
      Bruno CALATAYUD
      International Projects Manager, EFICAD

      Read more